8 TROUBLE SHOOTING
Nr. ANOMALY POSSIBLE SOLUTION
1 I turn on the truck but
nothing happens.
- The battery is exhausted: recharge
- The power connections are broken or incorrect: check
the connections from the battery
2 The engine does not start
when I hold stick down left.
- Check that the turning indicators flash, high beam and
fog lights operate in the right direction with respect to
the control stick, if not servo channels and/or reverse
settings need changing.
If correct check battery voltage, engine won’t start on a
low battery.
3 I turn on the truck but the
headlights continues to flash
-No valid RX signals received : check the connections
between the IBU2 truck and receiver
4 The turning indicators are in
opposite direction
- Reverse the channel (Ch4) in the transmitter or in the
settings file IBU2.ini
5 I have no sound - Ensure that the volume is turned up
- Ensure that the speaker is connected
- Ensure the microSD card is plugging in correctly
- Ensure that the samples are all present in the microSD
card, the correct size and properly associated to its
function in the file IBU2.ini
6 The truck moves or steers
the opposite direction
compared to controls
- Reverse the acceleration channel (Ch1) and / or steering
(Ch2) on the transmitter or in the settings file
IBU2_TR.ini
7 The servo(s) does not move - Check that the servo connector is inserted with the
correct orientation
- Check that the servo can move freely in the direction
8 The card overheats or a
burning smell
- Disconnect the battery immediately / off the wagon:
there must be some short circuit in your links!
To Next Page
Loading...