What to do if I.B.U. Electronics IBU2 Remote Control truck headlights continue to flash?
If your I.B.U. Electronics Remote Control truck turns on, but the headlights continue to flash, it indicates that no valid RX signals are being received. Check the connections between the IBU2 truck and the receiver.
Why does my I.B.U. Electronics IBU2 Remote Control truck move in the opposite direction?
If your I.B.U. Electronics Remote Control truck moves or steers in the opposite direction compared to your controls, reverse the acceleration channel (Ch1) and/or steering (Ch2) on the transmitter or in the settings file IBU2_TR.ini.
What to do if I.B.U. Electronics IBU2 card overheats?
If your I.B.U. Electronics Remote Control card overheats or you notice a burning smell, immediately disconnect the battery or turn off the wagon. This indicates a short circuit in your connections.
How to fix no sound on I.B.U. Electronics IBU2 Remote Control?
If you have no sound on your I.B.U. Electronics Remote Control, make sure that the volume is turned up, the speaker is connected, the microSD card is correctly plugged in, and the samples are all present in the microSD card with the correct size and properly associated to its function in the file IBU2.ini.
What to do if I.B.U. Electronics IBU2 truck turns on but nothing happens?
If your I.B.U. Electronics Remote Control truck turns on but nothing happens, it could be due to an exhausted battery. In this case, recharge it. Alternatively, the power connections might be broken or incorrect, so check the connections from the battery.
How to troubleshoot I.B.U. Electronics IBU2 Remote Control servo that does not move?
If the servo(s) on your I.B.U. Electronics Remote Control does not move, check that the servo connector is inserted with the correct orientation and that the servo can move freely in the direction.
What to do if I.B.U. Electronics IBU2 engine does not start?
If the engine of your I.B.U. Electronics Remote Control does not start when you hold the stick down left, check that the turning indicators flash, high beam and fog lights operate in the right direction with respect to the control stick, if not servo channels and/or reverse settings need changing. If correct check battery voltage, engine won’t start on a low battery.
How to fix I.B.U. Electronics IBU2 turning indicators in opposite direction?
To correct the turning indicators on your I.B.U. Electronics Remote Control if they are in the opposite direction, reverse the channel (Ch4) in the transmitter or in the settings file IBU2.ini.
Explains additional functions like headlights, high beam, fog lights, trailer latch, horns, and engine revving.
Explains adjustment of tail light intensity and brake light duration.
Covers setting maximum motor current threshold and overall motor power scale.
Details setting minimum/maximum vibration speed and maximum reverse speed.
General| Brand | I.B.U. Electronics |
|---|---|
| Model | IBU2 |
| Category | Remote Control |
| Language | English |
To Next Page