07 | Ellipsis
Getting started
1. Make sure your phone is connected to the same Wi-Fi
network as you wish to connect your speaker to.
This must be a 2.4GHz network - not 5GHz.
2. Plug your Ellipsis speaker into a mains socket and switch
on the mains socket*. The LED ring will light up orange
and after a few seconds you will hear a tone to indicate
the speaker is ready to connect to Wi-Fi.
3. Open the i-box Player on your phone/tablet,
screen (A) will appear showing searching for
i-box wireless Hi-Fi system, press “Add Device”.
*Please Note: Your Ellipsis Speaker is supplied with a
slide-in pin adaptor for your country. Slide it into the back
of the Ellipsis until it locks into position.
player
A
i-box player
App Icon
Before getting started
1. Download and install the i-box player app from
Play Store or the App Store to your phone/tablet
(Search for i-box)
2. Download and install the Amazon Alexa app from
Play Store or the App Store to your phone/tablet
(Search for Alexa)
Amazon Alexa
App Icon
To Next Page
Loading...
