MAINTENANCE
BATTERY LEVEL AND BATTERY REPLACEMENT
As soon as the battery level of your key fob reaches a critical
level, the key fob LED starts flashing red. When this happens,
the battery should be replaced to ensure continued reliable
operation.
Carry out the following steps to replace the key fob battery:
I.
Open the battery cover.
II.
Remove the old battery and dispose of it properly.
III.
Insert a new battery into the battery compartment and
close the battery cover.
The key fob is now fully operational again.
All settings are retained during the battery change and
no new initial setup is required.
To Next Page
Loading...