7
About the operation of on-screen
keyboard
Use the on-screen keyboard to enter characters for the
setting items. When clicking the [
] icon beside the entry
field, the on-screen keyboard will be displayed, and it will
become possible to enter characters by clicking the
character keys on the keyboard.
On-screen keyboard screen
Entry field
Language selection pull-down menu
Click the [▼] button to select the
language for character entry.
[Del all] button
Deletes all the characters in the entry field.
[←]/[→] button
Move the cursor in the entry field to either direction.
[Delete] button
Deletes a character pointed by the cursor in the entry field.
[A/a] button
This button changes the characters to be entered between
capital letters and small letters.
[Next] button
Changes the keys to be displayed for character entry.
The displayed keys are changed as follows:
Keys for the language selected by the language
selection pull-down menu → Combination characters →
Special characters
[Enter] button
Determines the entered characters and closes the on-screen
keyboard.
Note:
• Basic operations are also applied to the "Login" window.
• Click the [×] button to close the window without
determining the entered characters.
Connection of a mouse
Connect the included mouse to the mouse connection port
on the front side of the recorder.
→ The mouse cursor will be displayed on the main monitor.
Mouse operation
Left-click the desired buttons and tabs on the screen.
(Hereinafter, "Left-click..." will be described as "Click..." in
this document.)
When the entry field has the [▲] and [▼] buttons or the [▼]
button, the setting value can be changed using the mouse
wheel.
When no operation is made for 10 seconds or more, the
mouse cursor will be hidden. The mouse cursor will be
displayed again when the mouse is moved.
Display method of the setting screen
Click the [Setup] button.
→ The top screen of the setup menu will be displayed.
This section explains operation of a mouse and the soft keyboard, and setting screen only.
The recorder can be operated using the mouse (included) connected to the mouse connection port on the front side of the
recorder.
It is also possible to perform settings and some operations of the recorder from the web browser. Refer to the Operating
Instructions for descriptions of how to operate from the web browser and the configurable settings using the web browser.
Basic operations
Introduction (continued)
To Next Page
Loading...
Need help?
General
