6 Operation
6.1 Before you start
Check the brushes and squeegee for wear and tear (see chapter 7 on maintenance).
6.1.1 Insert the battery
Figure 13
1. Put the i-mop® Lite in park position (see 4.2).
2. Push the battery (Figure 13, pos 1) in the battery slot. A click signals the battery is locked in place
by the retaining clip (Figure 13, pos 4).
3. During operation, you can check the amount of power left (Figure 13, pos 2) by pressing the
power indicator (Figure 13, pos 3) on the battery.
To Next Page
