i-team i-mop Lite - Troubleshooting Guide; Common i-mop Lite issues and fixes

34
8 Troubleshooting
Problem
Cause
Solution
No power
No battery
Insert battery
Empty battery
Charge battery
Battery incorrectly placed
Remove and reinstall battery
Insufficient/no water
flow
Wrong program
Check the operating mode on
the control panel
Eco mode on
Check the ECO mode light on
the control panel
Empty tank
Fill the tank
Tank incorrectly placed
The tank valve must be clicked
on the nipple to open the seal,
replace the tank
Filter blocked
Ensure the solution tank has
no dirt particles and the filter is
clean
Blocked water pipe
Request for service
Poor water recovery
Squeegee opening blocked
Remove the pipe and clean the
squeegee opening
Tears in squeegee blades
Replace squeegee blades
Filter blocked
Check the yellow filter and
clean if necessary
Vacuum hose blocked
Check and remove blockage
Vacuum pump not running
Request for service
Leakage
Tanks incorrectly placed
Check and reattach fluid tanks
Tear in vacuum hose
Replace vacuum hose or
request for service
Battery not charging
Battery is at end of life
Replace battery