6
Issue 1.11
1.3 Symbols used
If safety instructions or other notes are used in this manual, they mean:
The non-
observance of this safety information may result in an imminent risk of death
or severe injury:
• By an electric shock!
• Due to the
improper handling of software products which are coupled to input
and output procedures with control function!
If you do not observe the safety instructions regarding the process and the system or
machine to be controlled, there is a risk of death or severe injury!
The non-
observance of this safety information may result in a potential risk of death or
severe injury!
The non-
observance of this safety information may result in a potential risk of injury or
material damage!
specifies special requirements or actions to be observed.
Important note
Note if some special features must be observed, for example
exceptions from the rule.
Tip
Tip or example as a helpful note or insider tip to make the work a little bit easier.
Other documentation
Reference to additional documentation or further reading.
To Next Page
