42 | Service and Technical Support | KermaX-plus
®
Chamber
8.5. Safety Inspection
This device does not require safety inspection.
8.6. Disposal and Recycling
This measuring device and its components contain electronic modules.
RECYCLING
None of the parts mentioned above may be disposed by the general house or
hospital waste disposal system. Please observe all local regulations governing the
disposal of your system. The end-user is responsible for complying with all local
regulations regarding the removal of the product from service. To avoid
environmental damage and/or injury and if you have no facility to convert the
device to electronic waste at the end of its life cycle, please return it to IBA
Dosimetry GmbH . We will ensure an environmentally correct recycling.
In the interest of complying with legal requirements concerning the environmental compatibility of our
products (protection of natural resources, avoidance of waste) we endeavor to reuse components and to
return them to the production cycle. We guarantee the functioning, quality and life of these components
by taking extensive quality assurance measures, just as for factory-new components.
The KermaX-plus
®
contains materials which can be detrimental to the environment. For this reason, the
proper disposal of the KermaX-plus
®
according to the regulations of national law and in view of
protecting the environment must be ensured. This is guaranteed by returning the KermaX-plus
®
to the
manufacturer.
Materials Used:
To Next Page
