2 Installation Guide
2.1 App Download
Apple Users：Search on the App Store for“iBaby Care”
Android Users：Search on the Google Play Store for“iBaby Care”
The icon of the app is as follows:
2.2 Getting Started
Connect your device to power adapter and wait for the iBaby jingle. The LED light on the
back of the monitor will turn to a blinking red light after 30 seconds. The red blinking and
jingle indicates that the device is ready for installation.
Note: If the device has been previously activated, it will not jingle when connected to the
power adapter.
For the LED status, please refer to Table 1 of section 4.1.
2.3 Register and Login
1.New users
Follow the prompt on the app to register an account. Use an active email address and use
a password must contain letters (case sensitive) and numbers. The length of it must be
over 6 characters. You can have the option to login automatically after registering.
Note: Active email can support users to find their password if they forget.
2.Users with account
Login with email and password you previously registered before. If you forget your
password, please click“Forgot Password”to reset your password.
2.4 Device Activation
Please confirm that your mobile phone used for activating the device is connected to your
Wi-Fi network. And then login with the registered account after the monitor is ready to
To Next Page
Loading...
