3.12 Water piping (domestic hot water)
3.12.1 Domestic hot water system
These appliances have an independent piping circuit for efficiently generating domestic hot
water. When a faucet is opened to draw hot water, water flow is detected with a flow sensor and
the appliance fires up to begin generating domestic hot water.
We strongly recommend treating hard water and adjusting the pH between 6.5 and 8.5. Refer to
the table on drinking water guidelines published by the US EPA. Consult a water treatment
adviser in your area to assess your local needs. Proper water treatment will aid in the longevity of
the appliance and ensure maximum efficiencies.
3.12 Water piping (domestic hot water)
To Next Page
Loading...
