EasyManuals Logo

IBC HC Series User Manual

IBC HC Series
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
IMPORTANT
This Boiler is equipped with a feature that saves energy by reducing the boiler water
temperature as the heating load decreases. This feature is equipped with an override
which is provided primarily to permit the use of an external energy management system
that serves the same function. THIS OVERRIDE MUST NOT BE USED UNLESS AT
LEAST ONE OF THE FOLLOWING CONDITIONS IS TRUE:
An external energy management system is installed that reduces the boiler
water temperature as the heating load decreases.
This boiler is not used for any space heating.
This boiler is part of a modular or multiple boiler system having a total input
of
300,000 BTU/hr or greater.
This boiler is equipped with a tankless coil (not applicable to IBC’s HC boilers).
US installers should contact IBC for any further information required.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBC HC Series and is the answer not in the manual?

IBC HC Series Specifications

General IconGeneral
Heat Exchanger MaterialStainless Steel
Installation TypeWall-mounted
TypeCondensing
Fuel TypeNatural Gas or Propane
EfficiencyUp to 95%
Ignition TypeElectronic
Vent Diameter2 - 3 inches
DimensionsVaries by model

Related product manuals