IBC SL 10-85 G3 User Manual

Warning
Before replacing the condensate trap, turn off the power to the boiler and allow to cool
down.
1.
To remove the trap pan, undo the
two wing nuts. Note the orientation of
the hose.
2.
Loosen the upper union nut,
and slide the condensate trap
off the boiler drain outlet.
3.
Unscrew the condensate union cap at
the base of the trap, empty the water and
flush the trap with water.
4.
Fill the condensate trap to the top
with water and replace the union cap
and gasket
86
Section: Service and maintenance

IBC SL 10-85 G3 Specifications

General

Brand	IBC
Model	SL 10-85 G3
Category	Boiler
Language	English