Iberital EXPRESSION PRO - Page 80

IBERITAL
Page 80 INSTALLATION AND OPERATION MANUAL
ENGLISH
- COUNTERS: Through this menu we can see all the counters.
-
IMPORTANT: The partial counters are all those relating to the making of coee, and hot water for infusions. To
erase them, press the buttons for “2 coees and 2 espressos” for GROUP 1 (on the left) simultaneously, when in
any counter menu screen. (The number of cycles and water consumed will be reset by the technician after the
service resets and/or filter regeneration).
- AUTO-WASH: Through this menu we can see the service counters.
-
Once a day of the week is selected, we can
enable or disable it independently of the
other days.
When a day of the week is
enabled, we can set the time for
switching the machine on and o
automatically.
By pressing the icon, we can select the group for
which we wish to see the counters.
Once a group is selected, we will see all
the count values for the group, by service
type.
If we select the “Other” value, we can see
all the general counters.
This screen shows us that we
have reset the partial counters
on our machine.
By pressing the icon we can select a group, or
all of them, in order to perform an individual or
collective auto-wash.
With the group or groups selected, we
need to confirm the auto-wash, having
previously fitted the blind filters.
When the temperature is insucient,
we will be informed via a message. We
can continue, or go back and perform
this function, having increased the
system temperature.
Auto-wash in progress
notification message.