Iberital EXPRESSION PRO - Page 84

IBERITAL
Page 84 INSTALLATION AND OPERATION MANUAL
ENGLISH
IMPORTANT (Compensation for the real temperature of the milk): It is necessary to apply a dierence to the
real temperature of the milk, as the temperature sensor, located inside the steam wand, always registers a
higher temperature than the real temperature of the milk in the jug.
- DOSE CONFIG: Through this menu we can edit all the settings related to making coee, dosing,
pre-brewing, and hot water.
-
We can change the temperature units,
to see the various temperatures in °C
(centigrade) or °F (Fahrenheit).
On this screen we can change the set
temperature for the coee boiler.
On this screen we can select the dosing
options for the buttons and the display.
We have the option of enabling or
disabling the permission to be able to
modify the dosing for coee services
via buttons.
We can modify, either individually
or as a whole, the volume of
water for each coee service
type, and water for teas.
By pressing the icon, we
can go through the various
coee service types.
We then modify the
volume of water
for the previously
selected service.
We can modify the volume
of water for infusion
service, modifying the
dose time.