Chapter 3: Using the OSCAR Interface 41
2. Click Commands. The Commands window opens.
Using the Version Window
Use the Version window to view the version numbers of the rack console switch hardware and
firmware. In this window, you can also click the Target button to access additional windows,
which allow you to view and upgrade the firmware versions on attached COs, to reset a PS/2
switch on a tiered rack console switch, and to decommission a CO.
NOTE: For optimum performance and ability to use all the latest features, keep all firmware current, as
described in “Appendix A: Firmware Upgrades.”
Accessing the Versions window and viewing rack console switch hardware and
firmware versions
1. Access the Commands window. If needed, see “Accessing the Commands window” on
page 40.
2. Click Commands->Display Versions. The Version window opens.
Figure 3.16: Version window
3. Click the Target button if you want to view the firmware versions for the COs connecting all
attached servers. The Target Selection window opens.
To Next Page
Loading...
Need help?
General
