12
The following table lists specific keys on the keyboard that will help you move
through the Setup menus:
Changing Parameter Settings
In the Setup menus, the configuration information that you can change is
enclosed in brackets like these: [ ]. You cannot change any information that is
not enclosed in brackets. Use the up- or down- arrow keys to highlight options
then press Enter to display a menu. When changing the setting of a particular
parameter, highlight the setting then use the left- or right- arrow key to change
the setting.
Loading the Default Settings
When you purchase an Aptiva computer, it is already configured for use. The
original configuration settings, also called factory or default settings, are stored
in the CMOS. Setup includes an option Load Default Settings that lets you
reload the original configuration at any time.
Keys Function
Down- or up-arrow key Use these arrow keys to highlight an option on the
menu. (Press the Enter key to choose the option.)
Left- or right-arrow key Use these arrow keys to make a selection and change
an option's setting. On some menus, you can use these
keys to move from one field to another.
PgUp Press this key to move from a menu to the menu
immediately preceding it. This key works only in
options with multiple menus.
PgDn Press this key to move from a menu to the menu
immediately following it. This key works only in options
with multiple menus.
F1 Press this key if you want help for a selected menu
option.
Esc After viewing or making changes to the settings on a
menu, press this key to exit the menu.
Enter Press this key to choose a highlighted option from a
menu
To Next Page
Loading...
Need help?
General
