11. Remove the side cover (see “Removing the side cover” on page 52).
12. Remove any adapters that impede access to the boot block recovery jumper
(see “Removing an adapter” on page 58).
13. Return the boot block recovery jumper to pins 1 and 2.
14. Replace any adapters that you removed (see “Installing an adapter” on page
59); then, install the side cover (see “Installing the side cover” on page 53).
15. Lock the side cover.
16. Reconnect the external cables and power cords; then, turn on the attached
devices and turn on the server.
218 System x3200 M2 Types 4367 and 4368: Problem Determination and Service Guide
To Next Page
Loading...
Need help?
General