IBM 5170 - Page 283

1 0 Your screen looks similar to the one below
when:
• Your system
is first installed.
• You install a new battery.
• You add
or remove an option.
Note:
If you received a "302 - System Unit
Key Lock is Locked" message, unlock the
lock
on the front of the system unit before
continuing.
XXXXX KB OK
161 - System Options Not Set-(Run SETUP)
(RESUME="F1"KEY)
IS YOUR SCREEN SIMILAR TO THE
SCREEN SHOWN ABOVE?
YES Go to step
12 "Running the Setup
Program".
NO Go to step 11.
POST 7-9