12
Running the Setup Program
Before your system unit can
be
used for the first
time, it must
be
told
what
options are installed.
Many
of the options are sensed by the system
unit when you turn the power on; however, it
still must
be
told the date, time, and the type of
fixed disk drive.
Then
it must verify the diskette
drive types
and
memory size.
The answers
to
the questions this program will
ask are listed
on
the "Setup Information"
foldout, which
is
in
the
back
of
this manual.
Now press
Fl
to start the "Setup" program;
then, follow the instructions
on
your screen.
Note:
If
you have any system unit problems
during the Installation
or
Setup program, go
to "Testing Your IBM Personal Computer
AT"
in your Guide
to
Operation manual.
POST 7-11
To Next Page
Loading...
