9 Install the adapter mounting screws.
IMPORTANT: You will have to run the "Setup"
program
on
your Diagnostics diskette after all
your options are installed.
10
Locate the "Setup Information" fold-out at the
back of this manual and circle the Base
Memory size.
• With all four rows of memory modules
installed, the Base Memory size
= 512K
bytes
11
If
you have any other internal options that need
to be installed, install them now.
If
not, go to
"Section 4, Cover Installation" .
256KB Memory Module Kit
3-15
To Next Page
Loading...
