4 Install the screw you removed in step
2.
IMPORTANT: You will have to run the "Setup"
program
on
your Diagnostics diskette after all
your options are installed.
5 Locate the "Setup Information" fold-out at the
back of this manual and circle the Base Memory
size.
• With the 128KB Memory Expansion Option
installed, Base Memory size
= 640K bytes
6
If
you have any other internal options that need
to be installed, install them now.
If
not, go to
"Section 4, Cover Installation".
128KB Memory Expansion
3-41
To Next Page
Loading...
