Overview of 7316-TF4 18.5-Inch Flat Panel Rack-Mounted Monitor and
Keyboard
This topic collection provides the overview of the 7316-TF4 18.5-Inch Flat Panel Rack-Mounted Monitor
and Keyboard.
The IBM 7316-TF4 18.5-Inch Flat Panel Rack-Mounted Monitor and Keyboard is a flat-panel display and
keyboard tray in one unit. The console unit occupies 1U
1
of space in a rack. You can install an optional
console switch behind the standard console in the rack to attach more than one server to the flat-panel
display and keyboard. If firmware and documentation updates are available, you can download them
from the IBM website.
Note: The 1 EIA unit in racks are measured in vertical increments of 1.75 inches each. Each 1.75-inch
increment is called an “EIA.” In some countries, the same increment may be referred to as a “U.”
Console features
Learn about the 7316-TF4 18.5-Inch Flat Panel Rack-Mounted Monitor and Keyboard console features.
The standard console has the following features:
v Mounts on slide-rails in the rack to enable easy movement and storage of the monitor
v Toolless rack installation in the 1U space of IBM rack configurations
v 18.5-inch, 16:9 ratio LCD panel with a VGA connection to the server or KVM switch
v Support for widescreen and previous (through scaling) resolutions
v Compatible with worldwide power and regulatory requirements
v Cable-management arm comes preinstalled on the rear of the console
v Can be shipped installed in an IBM rack
Check Your Inventory
Find information about the parts shipped along with the 7316-TF4 18.5-Inch Flat Panel Rack-Mounted
Monitor and Keyboard console.
Note: The illustrations in this topic might differ slightly from your hardware.
The console kit contains the following items:
v One console unit with built-in flat-panel display and cable-management arm (A 1 m power cord is
routed along the cable-management arm and is secured with cable straps.)
2 Power Systems: 7316-TF4 18.5-Inch Flat Panel Rack-Mounted Monitor and Keyboard
To Next Page