IBM 74Y4064 Handbook

Installing the AIX device driver software
Find information about how to install the AIX device driver software for a PCI adapter.
Before you begin
If you are installing the AIX operating system at this time, install the adapter before you install the
operating system. When you install AIX, the adapter device driver is automatically installed and the
following procedure does not apply to your situation.
About this task
If you are installing only the device driver for a PCI adapter, perform these steps:
Procedure
1. Log in to the system unit as root user.
2. Insert the media containing the device driver software (for example, the CD) into the media device.
If your system does not have a CD-ROM drive, refer to your system documentation for performing a
Network Installation Management (NIM) installation.
3. Type the following System Management Interface Tool (SMIT) fast path command: smit devinst.
4. Press Enter. The Install Additional Device Software window highlights the INPUT device / directory
for software option.
5. Type the name of the input device that you are using, or press F4 to select the input device from a
list.
6. Press Enter. The Install Additional Device Software window highlights the SOFTWARE to install
option.
7. Press F4 to select List.
8. Type / to display the Find window.
9. Type the device package name, and press Enter. The system finds and highlights this device driver
software.
10. Press F7 to select the highlighted device driver software, and press Enter. The INSTALL
ADDITIONAL DEVICE SOFTWARE window is displayed. The entry fields are automatically
updated.
11. Press Enter to accept the information. The ARE YOU SURE window is displayed.
12. Press Enter to accept the information. The COMMAND STATUS window is displayed.
v The message RUNNING is highlighted to indicate that the installation and configuration command is
in progress.
v When RUNNING changes to OK, scroll to the bottom of the page and locate the installation summary.
v After a successful installation, SUCCESS displayed in the Result column of the installation summary
at the bottom of the page.
13. Remove the installation media from the drive.
14. Press F10 to exit SMIT.
What to do next
You can verify if the device driver has installed for the PCI adapter. For instructions, see “Verifying the
AIX device driver software.”
Verifying the AIX device driver software
Find information about how to verify if whether the AIX device driver is installed for a PCI adapter.
Managing PCIe adapters 11

IBM 74Y4064 Specifications

General

Brand	IBM
Model	74Y4064
Category	Adapter
Language	English