Shipping carton contents
TABLE 6
Installation and basic system configuration (Continued)
Task Task details or additional information Completed
Verify that the device operates correctly.
• Check the LEDs to verify operation of functional parts. Refer to Interpreting
port-side LEDs on page 67 and Interpreting nonport-side LEDs on page 70.
• The following commands can be useful to establish an operational baseline for
the device. Refer to the Fabric OS Command Reference for more information
on these commands.
‐ psshow
‐ fanshow
‐ tempshow
‐ historyshow
‐ errdump
Back up the configuration. Use the interactive configupload command to back up the configuration. Refer to
Verifying correct operation on page 56 for more information.
Optional: Power off the devices. Enter the shutdown command and wait for the device to power down, and then
unplug the power cords. Refer to Powering down the device on page 58 for more
information.
Shipping carton contents
When unpacking the device, verify that the contents of the shipping carton is complete. Save the
shipping carton and packaging in the event you need to return the shipment.
• The IBM device
• An accessory kit containing the following items:
‐ A serial cable
‐ Two 6-ft. power cords
‐ Power cord retainer clips
‐ Rubber feet.
‐ China-RoHS Hazardous/Toxic Substance statement
‐ Network Advisor web pointer card.
‐ EZSwitch web pointer card
‐ IBM documentation web pointer card
• Inner foam
Hardware Installation Guide 23
To Next Page
Loading...
Need help?
General