Server events
The following table lists the events that are created for the Server component.
Server events
Table 7. Server events
Event Event Type Severi
ty
Message Description Cause User Action
cpu_peci_ok STATE_CHANGE INFO PECI state of
CPU {0} is ok.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
cpu_peci_failed STATE_CHANGE ERRO
R
PECI state of
CPU {0} failed.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
cpu_qpi_link_ok STATE_CHANGE INFO QPI Link of CPU
{0} is ok.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
cpu_qpi_link_failed STATE_CHANGE ERRO
R
QPI Link of CPU
{0} is failed.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
cpu_temperature_ok STATE_CHANGE ERRO
R
QPI Link of CPU
{0} is failed.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
cpu_temperature_ok STATE_CHANGE INFO CPU {0}
temperature is
normal ({1}).
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
cpu_temperature_failed STATE_CHANGE The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_power_supply_ temp_ok STATE_CHANGE INFO Temperature of
Power Supply
{0} is ok. ({1})
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_power_supply_ temp_failed STATE_CHANGE ERRO
R
Temperature of
Power Supply
{0} is too high.
({1})
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_power_supply_oc_line_ 12V_ok STATE_CHANGE INFO OC Line 12V of
Power Supply
{0} is ok.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_power_supply_oc_line_
12V_failed
STATE_CHANGE ERRO
R
OC Line 12V of
Power Supply
{0} failed.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
12 IBM Elastic Storage System 3000: Service Guide