IBM Elastic Storage System 3000 User Manual

Table 4. Events for the Enclosure component (continued)
Event Event Type Severity Message Description Cause User Action
voltage_high_warn STATE_CHANGE WARNIN
G
Voltage sensor {0}
measured a high
voltage value.
The voltage has
exceeded the
actual high warning
threshold value for
at least one sensor.
N/A N/A
voltage_low_critical STATE_CHANGE WARNIN
G
Voltage sensor {0}
measured a low
voltage value.
The voltage has
fallen below the
actual low critical
threshold value for
at least one sensor.
N/A N/A
voltage_low_warn STATE_CHANGE WARNIN
G
Voltage sensor {0}
measured a low
voltage value.
The voltage has
fallen below the
actual low warning
threshold value for
at least one sensor.
N/A N/A
voltage_sensor_failed STATE_CHANGE WARNIN
G
Voltage sensor {0}
is failed.
The voltage sensor
state is failed.
N/A N/A
voltage_sensor_ok STATE_CHANGE INFO Voltage sensor {0}
is ok.
The voltage sensor
state is ok.
N/A N/A
Physical disk events
The following table lists the events that are created for the Physical disk component.
Table 5. Events for the physical disk component
Event Event Type Severity Message Description Caus
e
User Action
gnr_nvram_ok STATE_CHANGE INFO The NVDIMM of the
pdisk {0} is normal
The nvram drive of the
disk is in normal
state.
N/A N/A
gnr_nvram_degraded STATE_CHANGE WARNING The NVDIMM of the
pdisk {0} is degraded.
The nvram drive of the
disk is in degraded
state.
The
tsls
nvra
msta
tus
com
mand
show
s
degr
aded
state
for
the
nvra
m
drive
of the
disk.
N/A
gnr_nvram_error STATE_CHANGE ERROR The NVDIMM of the
pdisk {0} is failed.
The nvram drive of the
disk is in error state.
The
tsls
nvra
msta
tus
com
mand
show
s
fail
ed
state
for
the
nvra
m
drive
of the
disk.
N/A
8 IBM Elastic Storage System 3000: Service Guide

IBM Elastic Storage System 3000 Specifications

General

Brand	IBM
Model	Elastic Storage System 3000
Category	Storage
Language	English