IBM L40 SX - Page 79

¦ ¦ port. To minimize ¦ ¦

¦ ¦ power usage, select ¦ Onboard Serial power: ¦

¦ ¦ option Off for the ¦ ¦

¦ ¦ port when no device ¦ On ¦

¦ ¦ is connected. ¦ Off ¦

¦ ¦ ¦ ¦

¦ ¦ Note: You can set ¦ ¦

¦ ¦ the Onboard ¦ ¦

¦ ¦ Parallel ¦ ¦

¦ ¦ power to Off ¦ Serial Adapter power: ¦

¦ ¦ when both the ¦ ¦

¦ ¦ Onboard ¦ On ¦

¦ ¦ Serial power ¦ Off ¦

¦ ¦ and the ¦ ¦

¦ ¦ Serial ¦ ¦

¦ ¦ Adapter power ¦ ¦

¦ ¦ (or the ¦ Note: This option is available and ¦

¦ ¦ Data/Fax ¦ displayed when the Serial Adapter ¦

¦ ¦ Modem power) ¦ is installed. ¦

¦ ¦ are set to ¦ ¦

¦ ¦ Off. ¦ ¦

¦ ¦ ¦ Data/Fax Modem power: ¦

¦ ¦ ¦ ¦

¦ ¦ ¦ On ¦

¦ ¦ ¦ Off ¦

¦ ¦ ¦ ¦

¦ ¦ ¦ Note: This option is available and ¦

¦ ¦ ¦ displayed when the Internal ¦

¦ ¦ ¦ Data/Fax Modem is installed. ¦

+------------------------------------------------------------------------¦

¦ Note: Default value is highlighted in the Option column. ¦

+------------------------------------------------------------------------+

PS/2 Model L40 SX Quick Reference

Managing Power Usage

3.8.3.2 - 2

Other manuals for IBM L40 SX