IBM L40 SX - Page 83

3.8.4.3 Format
PS2 option1 option2
#option1 and option2:
+------------------------------------------------------------------------+
¦ ¦
option2
¦
¦
option-
----------------------------------------------------------------¦
¦ ¦
First Value
¦
Second Value
¦
+-------+----------------------------------------------------------------¦
¦ -- ¦ Displays the Set Features Menu. No first and second values ¦
¦ ¦ are required. ¦
+-------+----------------------------------------------------------------¦
¦ ? | ¦ Displays the format of all the commands available. No first ¦
¦ Help ¦ and second values are required. ¦
+-------+----------------------------------------------------------------¦
¦ [SET] ¦ Audio ¦ ON | OFf ¦
+-------+--------------+-------------------------------------------------¦
¦ SET ¦ AUTo ¦ Battery | Performance ¦
+-------+--------------+-------------------------------------------------¦
¦ [SET] ¦ DISK ¦
XX
minutes (0 - 15) ¦
+-------+--------------+-------------------------------------------------¦
¦ [SET] ¦ DISplay map* ¦ Color | Mono ¦
+-------+--------------+-------------------------------------------------¦
¦ [SET] ¦ Keyboard ¦ ON | OFf ¦
¦ ¦ Click ¦ ¦
+-------+--------------+-------------------------------------------------¦
¦ [SET] ¦ Keyboard ¦ Fast | Med | Slow ¦
¦ ¦ Speed ¦ ¦
+-------+--------------+-------------------------------------------------¦
¦ [SET] ¦ LCd ¦
XX
minutes (0 - 20) ¦
+-------+--------------+-------------------------------------------------¦
¦ [SET] ¦ LCD | CRT* ¦ ¦
+-------+--------------+-------------------------------------------------¦
¦ [SET] ¦ LOw battery ¦ ON | OFf ¦
¦ ¦ alarm ¦ ¦
+-------+--------------+-------------------------------------------------¦
¦ SET ¦ MAnual ¦ 20 | 10 | 5 ¦
+-------+--------------+-------------------------------------------------¦
¦ [SET] ¦ Modem ¦ OFf | On ¦
+-------+--------------+-------------------------------------------------¦
¦ [SET] ¦ Normal ¦ ¦
+-------+--------------+-------------------------------------------------¦
¦ -- ¦ OFf ¦ ¦
+-------+--------------+-------------------------------------------------¦
¦ -- ¦ ON at ¦
HH:MM:SS
¦
+-------+--------------+-------------------------------------------------¦
¦ SET ¦ Parallel ¦ OFf | ON ¦
+-------+--------------+-------------------------------------------------¦
¦ [SET] ¦ POwer off ¦
XX
minutes (0 - 20) ¦
+-------+--------------+-------------------------------------------------¦
¦ [SET] ¦ Reversed ¦ ¦
+-------+--------------+-------------------------------------------------¦
¦ [SET] ¦ SERial ¦ OFf | On ¦
+-------+--------------+-------------------------------------------------¦
¦ [SET] ¦ SERial ¦ OFf | On ¦
¦ ¦ Adapter ¦ ¦
+------------------------------------------------------------------------¦
¦ Notes: ¦
¦ ¦
¦ 1. The following explains [SET], SET, and -- in the left column of ¦
¦ this table. ¦
¦ ¦
¦ [SET] Indicates that you can omit the value, SET, for option1. ¦
¦ If you specify SET, the command you enter is stored and ¦
¦ remains in the computer memory even though the power switch ¦
¦ is turned off. If you do not specify SET, the command is ¦
¦ no longer in effect when the power switch is turned off. ¦
¦ SET Indicates that you cannot omit the value, SET, for option1. ¦
¦ -- Indicates that you cannot specify the value, SET, for ¦
¦ option1. ¦
¦ ¦
¦ 2. * Indicates that this command is not supported in the OS/2 ¦
¦ environment. ¦
+------------------------------------------------------------------------+
Usage Note: When using any of these commands, type only highlighted
letters in the above tables.
#Examples: The following shows examples of commands to modify the
PS/2 Model L40 SX Quick Reference
Format
¦ Copyright IBM Corp. 1991
3.8.4.3 - 1