3.8.5.1 Installing the Sample Batch Programs
1. Insert the backup copy of the Reference Diskette into the diskette
drive.
2. Install a sample batch program using the copy command peculiar to the
DOS or OS/2 operating systems.
Note: Sample batch programs are provided for both operating systems.
The extension .BAT on a file name identifies the DOS sample
| (for example, DEFAULT.BAT) while the extension .CMD identifies
| the OS/2 sample (for example, DEFAULT.CMD).
PS/2 Model L40 SX Quick Reference
Installing the Sample Batch Programs
¦ Copyright IBM Corp. 1991
3.8.5.1 - 1
To Next Page
Loading...
