To Next Page

To Previous Page

3.8.5 Using the Sample Batch Programs

$The following sample batch programs are provided so you can set or change

one or all operational features using one command:

 DEFAULT

This program sets all the operational features to the default values.

The default values are the same values as set at the factory.

 TRAVEL

This program sets all the operational features related to the power

$ supply by the Rechargeable Battery to the values that make the battery

$ life between charges as long as possible.

# PRINTCOM

This program turns off and on the parallel, serial, and communication

interface connectors at the same time.

$ SETUPPWR

$ This program detects what power source the computer is using, and

$ calls the sample batch program:

$ - TRAVEL when the Rechargeable Battery is being used.

$ - DEFAULT when the AC Adapter or the Car Battery Adapter is being

$ used.

Subtopics

3.8.5.1 Installing the Sample Batch Programs

3.8.5.2 Usage Note:

PS/2 Model L40 SX Quick Reference

Using the Sample Batch Programs

3.8.5 - 1

IBM L40 SX User Manual

Other manuals for IBM L40 SX