IBM NetVista Hardware

86
System Board
To remove the system board from the system:
 To remove the system board, you must remove the adapter cards first.
 Disconnect the power cable, CD-ROM cable, Diskette Drive cable, Hard Disk Drive cable, audio cable, power switch cable, speaker
cable and LED cable from system board.
 Remove the six screws on system board.
Note: Be sure to stay the I/O Port Bracket on chassis when replacing the system board.

IBM NetVista Specifications

General

Category	Desktop
Model	NetVista
Processor Type	Intel Celeron
Memory Type	SDRAM
Optical Drive	CD-ROM, DVD-ROM, or CD-RW
Graphics	Integrated Intel graphics
Audio	Integrated audio
Network	10/100 Ethernet
Operating System	Windows 2000, Windows XP (Varies by model)
Expansion Slots	PCI
Ports	USB, serial, parallel, VGA, audio in/out