IBM Power System 9009-41A User Manual

DANGER: Multiple power cords. The product might be equipped with multiple AC power cords
or multiple DC power cables. To remove all hazardous voltages, disconnect all power cords and
power cables. (L003)
5. For a rack-mounted system, remove the front cover by pulling it away from the system.
The cover has indentations (A) where you can hold it more easily. See Figure 51 on page 55.
Figure 51. Removing the front cover
6. For a stand-alone system, remove the front cover and door by completing these steps.
a) Insert the front door key into the lock as shown in Figure 52 on page 56. Twist the key to the left
(counterclockwise) to unlock the door. Horizontal is locked; vertical is unlocked. Open the front
door.
Control panel cables for the 9009-41A, 9009-42A, or 9223-42H
55

IBM Power System 9009-41A Specifications

General

Processor	POWER9
Memory slots	16
Form factor	4U
Operating systems supported	AIX, IBM i, Linux
Processor cores	4
Processor threads	32
Processor speed	2.8 GHz
Maximum memory	1024 GB
Storage	SAS SFF Gen3 HDD/SSD, NVMe SSD