IBM Storwize V5030 Quick Installation Guide

Table 18. Enclosure weight as FRUs are installed (continued)
Enclosure assembly Approximate weight
FRUs installed FRUs not installed kg lb
v Enclosure (01LJ607 or
01LJ112)
v Secondary expansion
modules
v Fascia (1U and 4U)
v PSUs
v Expansion canisters
v Fan modules
v Fan interface board
v Display assembly
v Drives
v Cover
58 127.9
Note: The following FRUs
are installed when the
enclosure is initially
shipped.
v Enclosure (01LJ607 or
01LJ112)
v Secondary expansion
modules
v PSUs
v Expansion canisters
v Fan modules
v Fan interface board
v Display assembly
v Cover
v Fascia (1U and 4U)
v Drives
61.5 135.4
v Enclosure (01LJ607 or
01LJ112)
v Secondary expansion
modules
v Fascia (1U and 4U)
v PSUs
v Expansion canisters
v Fan modules
v Fan interface boards
v 92 2.5-inch tier 1 flash
drives
v Cover
78.6 173.3
v Enclosure (01LJ607 or
01LJ112)
v Secondary expansion
modules
v Fascia
v PSUs
v Expansion canisters
v Fan modules
v Fan interface board
v 92 2.5-inch hard disk
drives
v Cover
86 189.6
40 Storwize V5000 Gen2: Quick Installation Guide

IBM Storwize V5030 Specifications

General

Model	IBM Storwize V5030
Category	Storage
Controller Enclosures	1 or 2
Maximum Drives	240
RAID Levels	0, 1, 5, 6, 10
Virtualization	Yes
Data Compression	Yes
Maximum Hosts	512
Form Factor	2U
Drive Types	SAS, NL-SAS, SSD
Host Interface	8 Gb FC, 16 Gb FC, 10 Gb iSCSI, 12 Gb SAS
Processor Cores	8 per controller