Need help?Do you have a question about the IBM Storwize V7000 Gen2 and is the answer not in the manual?
General| Model | Storwize V7000 Gen2 |
|---|---|
| Drive Interface | SAS |
| Maximum Drives | 504 |
| RAID Levels | 0, 1, 5, 6, 10 |
| Cache | Yes |
| Form Factor | 2U |
| Cache Memory | 64 GB per control enclosure |
| Operating System | IBM Spectrum Virtualize |
| Humidity | 8% to 80% non-condensing |
| Drive Types Supported | SSD |
| Power Supply | Dual, hot-swappable |
| Host Interface | Fibre Channel, iSCSI, FCoE |
| Maximum Host Ports | 16 |
| Input Voltage | 100-240 V AC |
| Operating Temperature | 10°C to 35°C |
| Non-operating Temperature | -10°C to 50°C |
Check shipment contents and confirm site meets environmental needs.
Follow best practices for selecting and preparing rack space for enclosures.
Detailed steps for mounting control and expansion enclosure rails in the rack.
Guide to physically install enclosures and connect SAS, Ethernet, and Fibre Channel cables.
Procedure to power up expansion and control enclosures and verify status via LEDs.
Configure web browser and use technician port for initial system setup.
Steps for integrating new expansion or control enclosures using the management GUI.
To Next Page
