a. On the menu bar in the Google Chrome browser window, click Settings.
b. Click Show advanced settings.
c. In the Privacy section, click Content settings.
d. In the Cookies section, select Allow local data to be set.
e. Click OK.
f. Refresh your browser.
3. Enable scripts to disable or replace context menus. (Mozilla Firefox only).
For Mozilla Firefox:
a. On the menu bar in the Firefox browser window, click Tools > Options.
b. On the Options window, select Content.
c. Click Advanced by the Enable JavaScript setting.
d. Select Disable or replace context menus.
e. Click OK to close the Advanced window.
f. Click OK to close the Options window.
g. Refresh your browser.
4. Enable TLS 1.1/1.2 (Microsoft Internet Explorer 9 and 10 only).
For Microsoft Internet Explorer:
a. Open Internet Explorer.
b. Select Tools > Internet Options.
c. Select the Advanced tab.
d. Scroll to the Security section.
e. Check the Use TLS 1.1 and Use TLS 1.2 checkboxes.
Note: IE 11 and later enable TLS 1.1/1.2 by default.
User name and password for system initialization
During the initialization procedure, you will need to log in to the Storwize V7000
management GUI.
The default user name and password for the management GUI are listed in Table 9.
Table 9. Default user name and password for the management GUI
User name Password
superuser passw0rd
Note: The 0 character in the password is a zero, not the letter O.
Initializing the system using the technician port
To initialize a new system, you must connect a personal computer to the technician
port on the rear of a node canister and run the initialization tool.
Before you begin
You require the following items:
v A personal computer with an Ethernet port that supports Dynamic Host
Configuration Protocol (DHCP)
v A supported browser that is installed on the personal computer
Chapter 3. Configuring the system 31
To Next Page
Loading...
Need help?
General