Models cabled by your service provider
The following models must be cabled by your service provider:
v 9406-550
v 9406-570
v 9406-595
v 9116-561
v 9117-570
v 9118-575
v 9119-590
v 9119-595
For
instructions about cabling the HMC, see Cabling the HMC.
For instructions about cabling the Thin Console, see “Cabling the Thin Console for System i5.”
Note: If you are an IBM System Services Representative installing other features, go to the following Web
site:
http://w3.rchland.ibm.com/projects/WCII
The Worldwide Customized Installation Instructions (WCII) Web site is intended for the exclusive
use of IBM System Services Representatives (SSRs, also known as service providers), offers
instructions for SSRs to install new SSR-installed systems and features.
Cabling the Thin Console for System i5
Learn how to connect the Thin Console to your server.
Use the following instructions to help you cable your Thin Console.
1. Complete the setup instructions that are provided with the Thin Console. This includes the following
tasks:
Figure 22. Back views of the OpenPower 720 server
Cabling your server 177
To Next Page
Loading...
Need help?
General