IBM System x3650 M4 HD 32
Models with 550 W power supplies:
100 to 127 (nominal) V AC; 50 Hz or 60 Hz; 6.5 A
200 to 240 (nominal) V AC; 50 Hz or 60 Hz; 3.3 A
Input kilovolt-amperes (kVA) (approximately):
Minimum configuration: 0.16 kVA
Maximum configuration: 0.73 kVA
BTU output:
Minimum configuration: 525 Btu/hr (154 watts)
Maximum configuration: 4053 Btu/hr (1188 watts)
Noise level:
6.6 bels (operating)
6.4 bels (idle)
Warranty options
The IBM System x3650 M4 HD has a three-year onsite warranty with 9x5/next business day terms. IBM
offers the warranty service upgrades through IBM ServicePac offerings. The IBM ServicePac is a series of
prepackaged warranty maintenance upgrades and post-warranty maintenance agreements with a
well-defined scope of services, including service hours, response time, term of service, and service
agreement terms and conditions.
IBM ServicePac offerings are country-specific, that is, each country might have its own service types,
service levels, response times, and terms and conditions. Not all covered types of ServicePac offerings
might be available in a particular country. For more information about the IBM ServicePac offerings that
are available in your country, visit the IBM ServicePac Product Selector:
https://www-304.ibm.com/sales/gss/download/spst/servicepac
The following table explains warranty service definitions in more detail.
Table 22. Warranty service definitions
Term Description
IBM onsite
repair (IOR)
A service technician comes to the server's location for equipment repair.
24x7x2 hour A service technician is scheduled to arrive at your customer’s location within two hours after
remote problem determination is completed. We provide service around the clock, every day,
including IBM holidays.
24x7x4 hour A service technician is scheduled to arrive at your customer’s location within four hours after
remote problem determination is completed. We provide service around the clock, every day,
including IBM holidays.
9x5x4 hour A service technician is scheduled to arrive at your customer’s location within four business hours
after remote problem determination is completed. We provide service from 8:00 a.m. - 5:00 p.m. in
the customer's local time zone, Monday through Friday, excluding IBM holidays. If after 1:00 p.m.,
it is determined that onsite service is required, the customer can expect the service technician to
arrive the morning of the following business day. For noncritical service requests, a service
technician will arrive by the end of the following business day.
9x5 next
business day
A service technician is scheduled to arrive at your customer’s location on the business day after we
receive your call, following remote problem determination. We provide service from 8:00 a.m. -
5:00 p.m. in the customer's local time zone, Monday through Friday, excluding IBM holidays.
To Next Page
Loading...
Need help?
General
