IBM ThinkPad 380XD Hardware Maintenance Manual

Power Management Features
Three power management modes are provided by the
computer to reduce power consumption and to prolong
battery life.
Standby Mode: In standby mode, the following
occurs:
 The LCD backlight turns off.
 The hard disk drive motor stops.
The following events cause the computer to enter standby
mode:
 Standby is requested by the Fn key (Fn+F3).
 There is inactivity under auto-standby mode set by
the ThinkPad Configration program.
The computer exits standby mode and resumes operation
when any key is pressed.
Suspend Mode: In suspend mode, the following
occurs:
 The LCD backlight turns off.
 The hard disk drive motor stops.
 The LCD is powered off.
 The hard disk drive is powered off.
 The CPU stops.
The following events cause the computer to enter suspend
mode:
 Suspend mode is requested by the Fn key (Fn+F4).
 The LCD is closed.
 A time-out occurred on the following devices:
– Keyboard
– TrackPoint III
– Hard disk drive
– Parallel connector
– Diskette drive
– AC Adapter
The duration of inactivity is specified in
Suspend
Timer of the ThinkPad Configration program.
 The battery power is low and the orange battery
power indicator blinks.
 Either the PS2 OFF or the PS2 SUSpend command
is set in the ThinkPad Configration program.
IBM ThinkPad 380XD, 385XD (2635) 35

IBM ThinkPad 380XD Specifications

General

Brand	IBM
Model	ThinkPad 380XD
Category	Laptop
Language	English