1150 PC Card slot assembly
For access, remove these FRUs, in order:
v “1010 Battery pack” on page 61
v “1020 Ultrabay Plus device” on page 62
v “1030 Hard-disk drive” on page 63
v “1050 Backup battery” on page 67
v “1060 DIMM” on page 69
v “1090 Keyboard” on page 77
v “1120 Keyboard bezel” on page 87
2
1
1
Step Screw (quantity) Torque
1 M2 × 16 mm, nylon-coated (4) 0.245 Nm
(2.5 kgfcm)
When installing: Make sure that the connector of the PC
card slot is firmly attached, and then
secure the screws.
Removing and replacing a FRU
100 ThinkPad T30 (MT 2366, 2367)
To Next Page
Loading...
