21
DEUTSCH
ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
Power Management
If your computer has
previously been used
with a CRT monitor and is
currently configured to a
display mode outside the
range that the Flat Panel
monitor can display, your
monitors failsafe feature
will display an image
sufficient to allow you to re-
configure the computer,
preferably to 1024 x 768 at
60Hz.
The power management feature is invoked when the computer recognizes
that you have not used your mouse or keyboard for a user-definable period.
There are several states as described in the table below.
As an
ENERGY STAR
®
Partner, IBM has determined that this product meets the
ENERGY STAR
®
guidelines for energy efficiency.
For optimal performance, switch off your monitor at the end of each working
day, or whenever you expect to leave it unused for long periods during the
day.
* There may be a slight delay before the picture reappears.
Product Disposal
The fluorescent lamp in the liquid crystal display contains a small amount of
mercury. Dispose of it as required by local ordinances and regulations.
State
Power
Indicator
Screen
Restoring
Operation
Compliance
On Steady green Normal
Active Off Blinking green Blank
Press a key or
move the mouse. *
E
NERGY STAR
®
To Next Page
Loading...
Need help?
General
