August 15, 2017
© Copyright IBM Corporation, 2017 Page 44 of 117
For each of the logical volume records, a status code is included that specifies the completion status for
the volume. The following table defines those status codes, the probable cause and the recommended
actions.
Note: Status codes that are not defined in the table are reserved for future use.
Status Code ’00’
Status Text For Copy Export, see the export status
record field definitions.
Probable Cause
The volume was successfully exported.
Status Code ’02’
Status Text 'Canceled - Host request’
Probable Cause
The volume could not be processed because the
operation was canceled by the host prior to
processing the volume.
Determine why the operation was canceled
and retry it.
Status Code ’03’
Status Text 'Canceled - Library request’
Probable Cause
The volume was not processed because the operation
was canceled, prior to processing the volume, by the
operator through the Library Manager console.
Determine why the operation was canceled
and retry it.
Status Code ’10’
Status Text ‘Terminated by library error’
Probable Cause
The volume could not be processed because the
operation was terminated by a non-recoverable
(check1) error detected by the Library Manager prior
to processing the volume.
Call an IBM Service Representative.
To Next Page
Loading...
Need help?
General
