August 15, 2017
© Copyright IBM Corporation, 2017 Page 48 of 117
Status Code ‘3E’
Status Text ‘Primary logical volume on secondary
pool volume'
Probable Cause
The logical volume is a primary logical volume but it
is resident on a physical volume associated with the
secondary storage pool specified as part of a copy
export operation. The physical volume could not be
exported. This is likely the result of a prior error in
recalling the original primary volume and a swap was
performed to make the copy on the secondary pool
the primary volume. (Obsolete – refer to Status Code
‘40’ below)
Force a recall of the logical volume. This
will cause it to be re-migrated to new
primary and secondary volumes so that it
can be exported.
Status Code ‘3F’
Status Text ‘Physical volume contains sole
accessible data'
Probable Cause
The logical volume resides on a physical volume in a
secondary storage pool specified as part of a copy
export operation, but that physical volume could not
be exported because it contains one or more logical
volumes that are the sole accessible copy of a
volume. Also read the probable cause description for
status code 40.
Note: Status codes 3F and 40 were introduced at
code level 8.5.0.xx
See the action for code 40
Status Code ‘40’
Status Text ‘Primary logical volume on secondary
pool volume'
Probable Cause
The logical volume which is resident on a physical
volume associated with the secondary storage pool
specified as part of a copy export operation is only an
accessible one. The physical volume could not be
exported. This is likely the result of a prior error in
recalling the logical volume from a physical volume
in a primary pool. The only accessible copy of the
logical volume is now on a physical volume in the
secondary volume pool.
Force a recall of the logical volume. This
will cause it to create a new copy on a
physical volume in the primary volume pool
so that it can be exported.
• Physical Export Volumes
To Next Page
Loading...
Need help?
General
