IBO IVR-10 User Manual

Dziękujemy za zakup naszego urządzenia!
przed przystąpieniem do użytkowania zapoznaj się z instrukcją obsługi.
Ze względów bezpieczeństwa do sterownika pompy dopuszczone są tylko
osoby znające dokładnie instrukcję obsługi.
Instrukcja obsługi IVR-10
Urządzenie może być stosowane tylko do współpracy z pompą.

IBO IVR-10 Specifications

General

Model	IVR-10
Category	Water Pump
Type	Submersible
Max Head	10 m
Voltage	230V
Frequency	50Hz
Cable Length	10 m
Housing Material	Stainless Steel
Impeller Material	Plastic
Protection Class	IP68
Connection Diameter	1.5 inches
Outlet Diameter	1.5 inches

Summary

Introductions

Product Introduction

Overview of the IVR-10 pump controller as an easy-to-use control and protection device for various pumps.

Applications and Advantages

Highlights energy efficiency, simple operation, reliability, comprehensive protection, and multi-pump control capabilities.

Usage Scenarios

Details applications in residential, service, industrial, water treatment, and agricultural sectors.

General Safety Precautions

Covers checks before use, electrical grounding, handling by inexperienced persons, and child safety.

Technical Parameters

Shape, Size, and Specifications

Details technical specifications like type, input/output power, voltage, frequency, and pressure sensor range.

Installation and Wiring

Installation Modes and Tank Requirements

Illustrates installation diagrams for different pump types and diaphragm tank specifications.

Wiring Diagrams and Safety Notes

Provides wiring diagrams for single/three-phase connections and emphasizes cable connection safety.

Operation and Control Panel

Pre-Operation Checks and Startup

Outlines checks before power-on and step-by-step instructions for starting the pump.

Control Panel Overview

Explains the display area and functions of control buttons like RUN, STOP, UP, and DOWN.

Multi-Pump Group Installation

Connecting Multiple Inverters

Details the process of configuring a pump group with multiple IVR-10 units and programming main/slave settings.

Maintenance and Disposal

Maintenance and Storage Guidelines

Provides instructions for maintenance, storage, and safekeeping of the device.

Product Disposal Information

Explains the proper procedures for disposing of the used electrical equipment.

Declaration of Conformity

Product Compliance and Standards

Lists product details, manufacturer information, and relevant EU directives and harmonized standards.