CR IMMO User Manual
25
9. When replacing the transmission ECU, two groups of anti-theft data are
required:
• Anti-theft data of transmission engine (backed up in step 5)
• Anti-theft data of the target vehicle
1).Select Edit1, tap NO, tap Obtain From EEPROM Data, select the new
gearbox EEPROM data backed up in step 5, and tap OK.
2). Tap Edit2, if you have obtained the relevant data of the original vehicle
gearbox from other equipment, select Manual Input Data and enter the
16-byte CS code of the original vehicle gearbox.
To Next Page
Loading...
