iCarsoft CR IMMO - Packing List

CR IMMO User Manual
1
1 Packing List
The following accessory items are only for reference. Please consult from the
local agency or check the package list supplied with this tool together.
No. Item Descriptions Qt.
1 CR IMMO Main Unit 1
2 VCI VCI dongle 1
3 IM2000 PRO Immobilizer Programmer 1
4
OBD II extension
cable
Connects the VCI dongle to the OBD II vehicle’s
DLC.
1
5 USB cable Type C to Type C, for charging. 1
6 Power adaptor For charging the tablet. 1
7
USB cable
(Mini B)
Type A to Mini B, for communication between tablet
and VCI
1
8
Non-16pin adaptor
cable kit
Connect to the vehicle equipped with non-OBD II
management system.
1
9
Cigarette lighter
cable
Supply power to the non-16pin connector from the
vehicle’s cigarette lighter receptacle.
1
10 OBD I adaptor box
Connect the diagnostic cable and non-16pin
adaptor cable.
1
11
Diagnostic main
cable
Connects the VCI dongle, IM2000 PRO and the
vehicle’s DLC
1
12 Chip Adapter
Place the EEFROM chip onto the socket, and then
plug it into the programmer socket.
1
13 MCU_V1 PCBA
Connect the programmer with MCU(chip soldering
is required in this procedure).
1
14 MCU_V2 PCBA
Connect the programmer with MCU(chip soldering
is required in this procedure).
1
15 EEPROM PCBA
Solder the desired chip on the EEPROM converter,
and then plug the board into the programmer(chip
soldering is required
1
16 MB-Key
Connect the programmer with the key lock, insert
the key into the programmer for further key
operations.
1