The Solid/Non-Flashing number on the
display is the CURRENT interior
temperature.
The Flashing number is your SET
temperature after adjustment.
The compressor will shut o when the
SET temperature is reached.
6.3 Why did it change back to the
original temperature after setting
the temperature?
Please leave your refrigerator upright
for 24 hours to allow the compressor
lubricant to resettle before powering on
the fridge.
Otherwise it may contribute to certain
operation abnormalities.
6.2 What should I do if the refrigerator
is upside down when it is delivered?
21
To Next Page
Loading...
