If there's no activity, the digital display will stop
ashing after 5 seconds, saving the temperature
settings for both compartments and returning
to normal display.)
The default temperature is set to 0°C at the
factory.
Long press the " " button for 2 seconds to
enter Setting Menu, while the display starts
ashing, short press " " to select the desired
function:
MAX/ECO mode — Triple Battery Protection
Operation — Fahrenheit/Celsius Switching.
2.3 Setting Mode
05
2.3.1 MAX/ECO Mode
Select MAX/ECO mode, when the current
operating mode start ashing, press the
" " or " " button once to switch to the next
or previous operating mode (cycling between
modes without limit).
To Next Page
Loading...
