06
NOTICE: When the temperature is set,
the display will return to show the current
temperature inside the refrigerator.
2.4 Switch Between °C to °F
In standby mode (fridge
turned off but plugged into
power), press and hold the
Temp.
Up and Down Buttons
on display E (Right Compt.)
at the same time for 3 seconds,
and you should be able to
toggle between Battery
Protection Levels and C/F
settings using the Button A.
Once you see either a C or F,
you can use UP/DOWN Button
switch between this two scales.
To Next Page
Loading...
