IceTech Evolution Line Xtreme 40 User Manual

16
1. Make sure the machine is on a level, horizontal surface,
and that the wheel brakes are applied.
2. Plug the blasting hose couplings into the socket on the
front of the machine and the blasting gun, respectively.
Check to make sure the hose couplings are correctly
connected.
4. Connect the main power supply.
STARTING THE DRY ICE MACHINE
SETTING UP
3. Connect the signal cable at both ends of the blasting
hose with the sockets on the front of the machine and
the blasting gun.
CORRECT ORDER IS IMPORTANT!
FIRST connect the blasting hose couplings,
THEN the signal cable.

IceTech Evolution Line Xtreme 40 Specifications

General

Brand	IceTech
Model	Evolution Line Xtreme 40
Category	Shot Blasting Machines
Language	English